ClickCease
A Plus Quality Inc.

Why Is My Boiler Leaking?

Why Is My Boiler Leaking?



Your boiler can serve you reliably and effectively for many years. Boilers have an average lifespan of 20 years. However, like every other home system, they may experience problems such as leakages. Water leaking boilers require the attention of an experienced technician since they could lead to damages. We recommend regular boiler maintenance in the Greater Toronto Area by our technicians at A-Plus Quality Heating and Cooling to prevent such issues. Below are some of the common causes of leaks in boilers and what to do.

Possible Causes of Boiler Leaks

There are many reasons for leaking boilers, but we will discuss a few of the most common causes. They include the following:

Corrosion

When dirt and debris buildup inside your boiler, it encourages corrosion of pipes and radiators. Over time corrosion weakens your tanks and pipework, which eventually leads to water leaks. If rust and corrosion have not spread further than a valve or a single pipe, then replacing the part can resolve the issue. However, if it has spread across the boiler, you will need to replace the whole system.


Pressure

High pressure is the most common cause of leaks in boilers. Boilers come with an outlet pipe that lets out excess pressure and prevents the system from imploding. The recommended pressure is between 1 and 2. If you notice the pressure gauge reads more than that, you need to reduce it.


Temperature

All boilers come with a temperature control valve (TCV) that monitors the water temperatures. The TCV regulates the water temperatures from getting too high. If you notice leaks from the TCV, it’s a sign that the temperatures are too high.


Pump seals

Due to contraction and expansion over time, your boiler pump can develop cracks that cause water leakages. The pump requires either resealing or replacement.


Loose Joints

Your boiler expands and contracts as temperature changes from cold to hot. This change can affect the joints and cause leaks. Through boiler maintenance in the Greater Toronto Area, the joints such as all pipes and tubes connected to the body can get tightened.


Wear and Tear

Like everything else, boilers do not last forever. If your boiler is old, it could experience leakages, and you need to replace it. It also consumes a lot of energy that leads to high monthly bills. A new system will not only save you money but will also offer you efficient heating.


What to Do if a Boiler is Leaking

The cause of leaking boilers can either be simple or complex. Nevertheless, they require immediate inspections from a certified technician from A-Plus Quality HVAC services in the Greater Toronto Area. While you should not attempt to perform repairs on your own, there are a few steps you can take to protect your home.

•  Turn off your homes water supply 

•  Switch off the boiler

•  Wipe any leaked water

•  Finally, contact a qualified technician for boiler repair in the Greater Toronto Area from A-Plus Quality Heating and Cooling.

Back to all blogs

A Plus Quality Inc.

Client Testimonials


Powered by HomeStars

FAQ

  • Most common Boiler Issues

    - Boiler fails to ignite
    - Low pressure
    - Strange Noises
    - Boiler is not responding to the thermostat
    - Cold Radiators
    - Boiler leaking or dripping
    - Boiler cycling very fast
    - Available Hot water but No Heat

  • Water is Leaking on my Furnace

    Water falling on to the furnace can harm your heating unit by affecting the control boards and other components enclosed in the furnace. There can be many causes to the water overflow, but the most common cases in the summer is the ice build up inside the evaporator coil due to low refrigerant level. Water build up can also be due to the evaporator coil having a crack on the base, if this is the case contact us by booking an appointment or call us today to have a technician come have a look at your unit and repair this issue before it causes excessive damage.  

  • What are mini-split advantages?

    Just as the name implies, a “mini-split” system is a “split system” however available in smaller capacities, for single room to whole house conditioning. Mini-split systems may range from as small as 9,000 BTUh per hour, comparable to say, a small window AC unit, for individual room use, up to 4 and 5 ton capacities for “Room By Room” (also known as “Zoning”) and whole house conditioning. With near universal design, mini-splits are “heat pumps” which provide both heating and cooling for a home. Here are key advantages when compared to traditional split systems:

    Efficiency- Mini-splits are highly engineered systems which offer attractive operating efficiencies, in many instances, eligible for utility company rebates.
    Heat Pump- Most mini-split systems are heat pumps, providing year-round comfort.
    Solar friendly- Due to very low power requirements, mini-splits are an ideal complement to “Net Zero Energy” homes, or any home using renewable power.
    Carbon footprint- Mini-splits are 100% electric, with zero operating emissions of any type.
    Zoning- Most mini-split manufacturers offer systems capable of room-by-room “zoning”, to account for peak demands of a room based upon construction type, exposure orientation and usage.
    Variable capacity- Mini-splits are typically DC inverter driven. That is, a variable speed compressor which modulates in proportion to instantaneous demand. Most conventional split systems, by comparison, operate with an ON-OFF strategy. (Would you use an ON-OFF switch as the accelerator in your vehicle?)
    Location, Location, Location!- Mini-split outdoor units are compact; they can be located far away from noise-sensitive areas, such as bedrooms and home offices. Mini-split indoor units have the ability to be installed where conventional systems cannot.
    They’re perfect for additions and remodels where access to current HVAC system is difficult to access.
    Modern mini-split systems are remarkably quiet; in fact, many times their operation is unnoticed by the end user.

  • What is a mini-split?

    By definition, and simply put, a “Split System” is a heating and air conditioning system which has two main components, the indoor unit and outdoor unit. In short, the indoor unit absorbs heat energy in the cooling mode, and the outdoor unit rejects the very heat absorbed by the indoor unit. And the cycle is repeated until the set temperature is met. Although the indoor and outdoor units are located in physically different, hence “split” locations, they are connected and operate as, one system; continuously circulating refrigerant liquid and vapor by means of interconnecting, dehydrated copper refrigerant lines, commonly referred to as a “Line Set”.

  • How do I know what size unit I need?
    If you have any problems with your system, you should contact the contractor who installed the units. All our systems are covered by a 5 year parts, 7 year compressor limited warranty
     

Read all FAQ

Popular blog

The Secret Life of HVAC Systems: An Inside Look at What Happens After You Adjust the Thermostat
  The world of HVAC systems is often hidden behind walls and ceilings, operating quietly to maintain the comfort of our homes and businesses. Once you adjust the thermostat to your desired temperature, a secret life unfolds within...

Read more

Read all blogs

A Plus Quality Inc.
X
Virtual video consultation

connect now